Sommaire:Since Gold Phoenix has offers FLEX Board service, a lot of customers ask us how to design flex board. We think that it is time to write a tutorial for flex board design.

Sommaire:A printed circuit board, or PCB, is used to mechanically support and electrically connect electronic components using conductive pathways, tracks or signal traces etched from copper sheets laminated onto a non-conductive substrate.

Sommaire:This application note outlines a process through which printed circuit boards (PCBs) may be produced using the PCB design and fabrication tools. This document describes the PCB production process in general and also presents a case study.

Sommaire:This document is written by Gold Phoenix, it give very useful information in PCB design and PCB fabrication. It can help the PCB designer to design the PCB in the way PCB manufacture can understand and get the job done.

Sommaire:This document is written by Gold Phoenix, it provide a brief analysis for the cost to manufacture a PCB boards. It can help customer to design the PCB with low cost.

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:A Gerber file for each section of your electronic circuit design is what you need if you want to create a PCB.

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:A ball grid array (BGA) is a type of surface-mount packaging (a chip carrier) used for integrated circuits.

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:THE GUIDELINES FOR SWITCHING POWER SUPPLIES (SMPS) DESIGN

Sommaire:In this article, we discuss why PCB copper traces should be plated, and we’ll review various plating materials and plating methods.

Sommaire:

Sommaire:Safe Distance Includes electrical clearance (space distance), creepage distance (distance along the surface) and insulation penetration distance.

Sommaire:

Sommaire:PCB Design Best Practices: Six things to consider when making PCB component choices based on part footprints.

Sommaire:Surface-mount technology (SMT) is a method for producing electronic circuits in which the components are mounted or placed directly onto the surface of printed circuit boards (PCBs).

Sommaire:

Sommaire:

Sommaire:

Sommaire:

Sommaire:This article here is to help define the pcb structures and terms a designer will need to in order to complete their pcb design.

Sommaire:In brief, each hole on the PCB can be called vias. From the point of view of function, vias can be divided into two categories: one is used as an electrical connection between the layers, and two is used as a device for fixing or positioning.

Sommaire:The work layer can be broadly divided into 7 categories: signal layers, internal planes (internal power/ ground layer), mechanical layer, solder mask layer, silk screen layer, others and system work layer.

Sommaire:There are many reasons a printed circuit board designer might want to have a via tented, plugged or filled.

Sommaire:There are 11 steps to the PCB design process & work flow.